HotSpot MWC Client simplifies hotspotting, offering an effortless way to connect to open networks. It guarantees secure connectivity, and it restores WLAN card settings once your session ends. Additionally, it automatically connects to OPEN networks, providing you with more options for accessing free public Wi-Fi.
All you need to do is install the software, and it will automatically search for available access points before connecting you to the best one. This feature is handy as it gives you some peace of mind when it comes to the security of your hotspot connection.
After using the HotSpot Client, you can quickly restore your earlier WLAN card settings, which ensures that your laptop remains easy to use in other networks. Therefore, you don’t have to worry about compatibility issues when using the software.
Although, it should be noted that the HotSpot Client supports only Windows XP SP2 or SP3. So, if you have a different operating system, this client might not work for you.
Version 5.0.0.1:
5.0.0.1 - 18.02.2010
- Fixed .NET log error, was too long
5.0.0.0 - 01.05.2009
- Support for new web based Azacco Wallet On-Line Pre
Version 4.0.0.4:
4.0.0.4 - 12.02.2009
- Minor fixes
- Now you can send mail to connected server operator just clicking column mail title. Same for using operators recommended irc.
4.0.0.3 - 16.09.2008
- In slow PC Hotspot can shutdown by itself. Fixed. The situation found in PIII/600MHz/320 Mb memory PC and lower.
Version 4.0.0.3:
4.0.0.3 - 16.09.2008
- In slow PC Hotspot can shutdown by itself. Fixed. The situation found in PIII/600MHz/320 Mb memory PC and lower.
- Sometimes Tray icon left to tray area. Fixed.
- A Listview error fixed
- Fixed: mess windows wireless connections table.
4.0.0.2 - 13.09.2008
- Fixed ‘Bad Data’ error in starting.
- Icon does not show anymore after resuming state.
- When computer goes to Stand By or Hibernation state. Hotspot shutdown.
4.0.0.1 - 08.09.2008
- Fixed error when changing AP. (Listview handling error)
- Fixed error in signal updating. (Listview handling error)
- Fixed error when state changes Limited to Connected.
- Limited Connection has deleted and functionality is now automatic.
- WPA field handling is improved in Properties.
4.0.0.0 - 29.07.2008
- Default value for “Ping†field.
- Limited button is deleted. Now Hotspot automatically goes to Limited state if you do not have needed balance.
- Fixed WPA restore. Use TKIP mode with WPA.
- Fixed start up minimized
- Fixed run start up.
- Deleted Shown menu and button. Now Hotspot remember your last state and restore your windows state as you have set it.
- Improved message field in left down corner.
3.1.1.3
- Connecting is more reliable as before
- VC redistributables are in installation
3.1.1.1
- If connection do not work now client continue trying from the next AP
- Invalid HotspotClient directory is not created
3.1.1
- Connects also OPEN networks
3.1.0
- Wallet is own program
- Minor changes to user interface
3.0.0
- NOT compatible version before.
- Better encryption for Wallet and money handling
- Newly coded tcp/ip handling
- Number localization
2.1.5
- Registry handling by MAC address
- Added option Start Startup
- Restore wpa-psk fixed
- Default values are ssid:â€Hotspot†and WPA-PSK:â€1111111111â€
- Notify icon handling fixed
- Added CentIPaid picture
- CentIPaid notifications have moved to header bar
2.1.1
- Added properties field checks
2.1.0
- This release is not compatible under 2.1 Servers.
- Fixed Wpa-Psk leak that was security risk
- Client died if it found a access point without SSID. Fixed.
- Fixed text boxes read-only.
2.0.9
- Minimize button behavour fixed, only one icon to tray.
2.0.8
- Shutdown problem fixed
2.0.7
- Some minor fixes
2.0.6
- Wait cursor disabled in connected state
- Centipaid Card can be in different folder
2.0.5
- Click minimize box minimizes Client to tray
- Improved TCP exception handling
- Fixed possible deadlock situations in different states
2.0.4
- Fixed many errors in exception
Version 4.0.0.2:
4.0.0.2 – 13.09.2008
- Fixed ‘Bad Data’ error in starting.
- Icon does not show anymore after resuming state.
- When computer goes to Stand By or Hibernation state. Hotspot shutdown.
4.0.0.1 – 08.09.2008
- Fixed error when changing AP. (Listview handling error)
- Fixed error in signal updating. (Listview handling error)
- Fixed error when state changes Limited to Connected.
- Limited Connection has deleted and functionality is now automatic.
- WPA field handling is improved in Properties.
4.0.0.0 – 29.07.2008
- Default value for “Ping†field.
- Limited button is deleted. Now Hotspot automatically goes to Limited state if you do not have needed balance.
- Fixed WPA restore. Use TKIP mode with WPA.
- Fixed start up minimized
- Fixed run start up.
- Deleted Shown menu and button. Now Hotspot remember your last state and restore your windows state as you have set it.
- Improved message field in left down corner.
3.1.1.3
- Connecting is more reliable as before
- VC redistributables are in installation
3.1.1.1
- If connection do not work now client continue trying from the next AP
- Invalid HotspotClient directory is not created
3.1.1
- Connects also OPEN networks
3.1.0
- Wallet is own program
- Minor changes to user interface
3.0.0
- NOT compatible version before.
- Better encryption for Wallet and money handling
- Newly coded tcp/ip handling
- Number localization
2.1.5
- Registry handling by MAC address
- Added option Start Startup
- Restore wpa-psk fixed
- Default values are ssid:â€Hotspot†and WPA-PSK:â€1111111111â€
- Notify icon handling fixed
- Added CentIPaid picture
- CentIPaid notifications have moved to header bar
2.1.1
- Added properties field checks
2.1.0
- This release is not compatible under 2.1 Servers.
- Fixed Wpa-Psk leak that was security risk
- Client died if it found a access point without SSID. Fixed.
- Fixed text boxes read-only.
2.0.9
- Minimize button behavour fixed, only one icon to tray.
2.0.8
- Shutdown problem fixed
2.0.7
- Some minor fixes
2.0.6
- Wait cursor disabled in connected state
- Centipaid Card can be in different folder
2.0.5
- Click minimize box minimizes Client to tray
- Improved TCP exception handling
- Fixed possible deadlock situations in different states
2.0.4
- Fixed many errors in exception situations.
- Improved authentication
2.0.3
- Fixed again a message handling problem
- Fixed error in situation in where are many possible APs
2.0.2
- Fixed tcp message handling
- Many minor fixes
2.0.1
- Fixed two error situations when no MWC AP is in range.
Version 2.1.5:
Version 2.0.0 Known problem
- Sometimes process do not kill when you exit from program. Use task manager to kill the process
- Message can lost because they are crypted whole message go away. Usually system reconnects a while.
- WZC do not notice that AP comes accessible after parameter change.
- WZC can hangs, restart laptop or service
2.0.1
- Fixed two error situations when no MWC AP is in range.
2.0.2
- Fixed tcp message handling
- Many minor fixes
2.0.3
- Fixed again a message handling problem
- Fixed error in situation in where are many possible APs
2.0.4
- Fixed many errors in exception situations.
- Improved authentication
2.0.5
- Click minimize box minimizes Client to tray
- Improved TCP exception handling
- Fixed possible deadlock situations in different states
2.0.6
- Wait cursor disabled in connected state
- Centipaid Card can be in different folder
2.0.7
- Some minor fixes
2.0.8
- Shutdown problem fixed
2.0.9
- Minimize button behavour fixed, only one icon to tray.
2.1.0
- This release is not compatible under 2.1 Servers.
- Fixed Wpa-Psk leak that was security risk
- Client died if it found a access point without SSID. Fixed.
- Fixed text boxes read-only.
2.1.1
- Added properties field checks
2.1.5
- Registry handling by MAC address
- Added option Start Startup
- Restore wpa-psk fixed
- Default values are ssid:â€Hotspot†and WPA-PSK:â€1111111111â€
- Notify icon handling fixed
- Added CentIPaid picture
- CentIPaid notifications have moved to header bar
Version 2.1.1:
Version 2.0.0 Known problem
- Sometimes process do not kill when you exit from program. Use task manager to kill the process
- Message can lost because they are crypted whole message go away. Usually system reconnects a while.
- WZC do not notice that AP comes accessible after parameter change.
- WZC can hangs, restart laptop or service
2.0.1
- Fixed two error situations when no MWC AP is in range.
2.0.2
- Fixed tcp message handling
- Many minor fixes
2.0.3
- Fixed again a message handling problem
- Fixed error in situation in where are many possible APs
2.0.4
- Fixed many errors in exception situations.
- Improved authentication
2.0.5
- Click minimize box minimizes Client to tray
- Improved TCP exception handling
- Fixed possible deadlock situations in different states
2.0.6
- Wait cursor disabled in connected state
- Centipaid Card can be in different folder
2.0.7
- Some minor fixes
2.0.8
- Shutdown problem fixed
2.0.9
- Minimize button behavour fixed, only one icon to tray.
2.1.0
- This release is not compatible under 2.1 Servers.
- Fixed Wpa-Psk leak that was security risk
- Client died if it found a access point without SSID. Fixed.
- Fixed text boxes read-only.
2.1.1
- Added properties field checks
Version 2.1.0:
Version 2.0.0 Known problem
- Sometimes process do not kill when you exit from program. Use task manager to kill the process
- Message can lost because they are crypted whole message go away. Usually system reconnects a while.
- WZC do not notice that AP comes accessible after parameter change.
- WZC can hangs, restart laptop or service
2.0.1
- Fixed two error situations when no MWC AP is in range.
2.0.2
- Fixed tcp message handling
- Many minor fixes
2.0.3
- Fixed again a message handling problem
- Fixed error in situation in where are many possible APs
2.0.4
- Fixed many errors in exception situations.
- Improved authentication
2.0.5
- Click minimize box minimizes Client to tray
- Improved TCP exception handling
- Fixed possible deadlock situations in different states
2.0.6
- Wait cursor disabled in connected state
- Centipaid Card can be in different folder
2.0.7
- Some minor fixes
2.0.8
- Shutdown problem fixed
2.0.9
- Minimize button behavour fixed, only one icon to tray.
2.1.0
- This release is not compatible under 2.1 Servers.
- Fixed Wpa-Psk leak that was security risk
- Client died if it found a access point without SSID. Fixed.
- Fixed text boxes read-only.
Version 2.0.9:
Version 2.0.0 Known problem
- Sometimes process do not kill when you exit from program. Use task manager to kill the process
- Message can lost because they are crypted whole message go away. Usually system reconnects a while.
- WZC do not notice that AP comes accessible after parameter change.
- WZC can hangs, restart laptop or service
2.0.1
- Fixed two error situations when no MWC AP is in range.
2.0.2
- Fixed tcp message handling
- Many minor fixes
2.0.3
- Fixed again a message handling problem
- Fixed error in situation in where are many possible APs
2.0.4
- Fixed many errors in exception situations.
- Improved authentication
2.0.5
- Click minimize box minimizes Client to tray
- Improved TCP exception handling
- Fixed possible deadlock situations in different states
2.0.6
- Wait cursor disabled in connected state
- Centipaid Card can be in different folder
2.0.7
- Some minor fixes
2.0.8
- Shutdown problem fixed
2.0.9
- Minimize button behavour fixed, only one icon to tray.
Version 2.0.6: N/A
Version 2.0.5: N/A