GoldExI is specialized data acquisition software that measures superconducting and Josephson structures.
GoldExI is an exceptional software solution that allows you to measure various parameters accurately. You can capture Current Voltage Characteristics (IVC), IVC families as a function of one parameter (IVF), Dependence of critical current on applied magnetic field (Ic(H)), Dependence of maximal current of the step/resonance on applied magnetic field (Imax(H)), Response of the system on applied waveform (V[I(t)]), Dependence of critical current on temperature (Ic(T)), Dependence of voltage at some bias point on temperature (V(T)), and more.
In addition to measurement, the software comes loaded with several other features, including the auto-detection of installed hardware, flexible configuration of DAC/ADC channels, gain control, and optimization for high speed. You can also count on averaging during measurements, flexible averaging options, sweep and programmable waveform generator, delay and timing control, and the ability to save files as plain ASCII dat-file and load them back for analysis.
The software is compatible with M$ Windows 95/98/Me/NT4/NT5/2000 and almost any 12 or 16-bit National Instruments ADC/DAC card. It requires at least one DAC channel and one ADC channel in your system. Furthermore, SCXI devices are supported but not extensively tested (this requirement is for the full version only), and NI-DAQ software v5.0 or above should be properly installed (this requirement is also for the full version only).
While the demo/office version is 100% functional, it performs emulation of Josephson junction and resistor instead of accessing hardware. As such, it gives you a glimpse of GoldExI abilities and serves as a 'viewer' for data acquired by others using the full version of GoldExI. You can use it on your office or home PC that doesn't have data acquisition cards.
You can use this demo/office version for free without any limitations, but you should consider buying the full version to have access to hardware, free upgrades, and free technical support. For more information, visit GoldExI web pages or send an email to the developer. Overall, GoldExI is an invaluable tool for anyone who needs to measure and analyze different electrical parameters accurately and quickly.
In addition to measurement, the software comes loaded with several other features, including the auto-detection of installed hardware, flexible configuration of DAC/ADC channels, gain control, and optimization for high speed. You can also count on averaging during measurements, flexible averaging options, sweep and programmable waveform generator, delay and timing control, and the ability to save files as plain ASCII dat-file and load them back for analysis.
The software is compatible with M$ Windows 95/98/Me/NT4/NT5/2000 and almost any 12 or 16-bit National Instruments ADC/DAC card. It requires at least one DAC channel and one ADC channel in your system. Furthermore, SCXI devices are supported but not extensively tested (this requirement is for the full version only), and NI-DAQ software v5.0 or above should be properly installed (this requirement is also for the full version only).
While the demo/office version is 100% functional, it performs emulation of Josephson junction and resistor instead of accessing hardware. As such, it gives you a glimpse of GoldExI abilities and serves as a 'viewer' for data acquired by others using the full version of GoldExI. You can use it on your office or home PC that doesn't have data acquisition cards.
You can use this demo/office version for free without any limitations, but you should consider buying the full version to have access to hardware, free upgrades, and free technical support. For more information, visit GoldExI web pages or send an email to the developer. Overall, GoldExI is an invaluable tool for anyone who needs to measure and analyze different electrical parameters accurately and quickly.
What's New
Version 3.16: N/A